What does ReliaSim cost?

ReliaSim desktop is $8,000 per user per year, billed annually, for Mac (Apple Silicon) or Windows 11. The license is node-locked to one machine and includes ReliaStats distribution fitting, phone and cloud-based messaging support, and all updates during the subscription. The ReliaSim CLI cloud add-on is $28,000 per user per year (Early Access, by quote). Lunch & Learn training sessions are $60 each. The Sandbox, the desktop demo, the ReliaStats Designer and a line assessment on your own data are free, and academic licenses are free for teaching and non-commercial research. Volume discounts apply from five licenses upward, purchase orders are welcome, and tax is applied at checkout. All prices.

What data do I need?

The stop history you already record. An .xlsx or .csv export from your historian or downtime tracker is enough, as long as it lists each stop rather than shift or daily totals. For each stop you need the machine, the reason code and its timing (start and end time, a start and a duration, or the uptime before the stop and the downtime in minutes), recorded to the second. Add machine rates, buffer sizes and changeover times, plus your measured OEE for the same period so the model can be checked against it. You can strip product names first, a mutual NDA is available, and your data is returned or destroyed when you ask. Where data is missing, the gap is modeled with an assumption and labeled. How a project runs.

How long does a project take?

On the free line assessment, about five business days from data to a two-page readout. Your time is a 45-minute intake call and a 30-minute readout call. A typical model build takes 15 minutes once the stop data is fitted. A full project follows the same nine steps, from the question to the decision, and is scoped with you; or you can license ReliaSim and run the steps yourselves. The nine steps.

How does the "within 1% of measured OEE" validation work?

It comes from a published, peer-reviewed plant study: Fischel and Lange, “High Accuracy Discrete Rate and Reliability Modeling,” Winter Simulation Conference 2020 (the paper, open access). The plant’s engineering team and consultant Tom Lange modeled a salad dressing plant from its own downtime records, with up to twenty failure modes on each of more than twenty unit operations. Before anyone used it for a decision, a one-year simulation had to land within 1% of the plant’s actual OEE for each product category, and observed and simulated availability were compared for each failure mode, not only the total. That model was rebuilt in ReliaSim and independently validated by Tom Lange: it came within 1% of both the plant’s measured OEE and the original ExtendSim model, and ran roughly 1,200× faster on the same laptop. On your own line the same check is a step in every project: the model runs over a period you already measured and is compared with your history, overall and failure mode by failure mode. The case study.

Is ReliaSim desktop or cloud software?

Desktop. ReliaSim is downloadable software for Mac (Apple Silicon) and Windows 11, licensed per user each year. It doesn’t depend on the cloud or need any integration, and models are files you keep and share with the tools you already use. The free Sandbox runs in your browser on sample models; it is a demo, not the product. The one cloud option is the ReliaSim CLI add-on (Early Access), which runs your models from the command line, scripts and scheduled jobs in a private ChiAha cloud, separate from other customers. It sends your models to our cloud, so if your data has to stay on site, use the desktop license.

Can ReliaSim run air-gapped, or only on our own network?

Yes. After install and license activation, ReliaSim runs entirely offline, with no outbound calls to load data, run simulations or save results. Periodic license and version checks happen over HTTPS when a connection is available and can be deferred, and offline licensing is available for installations that never touch the internet. It suits OT segments, defense facilities and validated GxP environments. Models, input data and results are local files in locations you control. Security and deployment.

What is ReliaStats, and what does it fit versus what ReliaSim does?

ReliaStats fits the inputs; ReliaSim runs the line. ReliaStats turns raw historian event logs into a time-to-failure and a time-to-repair distribution for each failure mode (Weibull, 2- and 3-parameter, and LogNormal, including censored data), checks each fit with a Kolmogorov-Smirnov test, and exports a ReliaSim-ready interrupt file. ReliaSim takes those interrupts, with your machine rates, buffers and changeovers, and simulates the whole line to show its OEE and output, where the constraint sits and which fix returns the most. ReliaStats then closes the loop with Interrupt Validation, which compares source and simulated availability interrupt by interrupt. Fitting comes with every ReliaSim license, and the Designer and Quick Start are free. In the desktop app, fitting runs offline. In the browser, nothing is uploaded unless you choose Fit from my data, which sends our server only the stop-timing columns you pick and keeps no copy (privacy policy). About ReliaStats.

What can I try for free?

The browser Sandbox (sample models from flow to a real bottling line, with the engine’s saved results and no download, sign-up or install), the desktop demo (the real application playing pre-built models, with no license key needed), the ReliaStats Designer, and a free line assessment: one line and one question, modeled on your data, with a two-page readout. On the assessment you receive the readout and run results, not the model file. Beat the Bottleneck is a free game on a bottling line, scored by ReliaSim.

Can people without a license open our models?

Yes. Anyone using the free demo can open and run a model built on a licensed seat, so a plant manager, a controls engineer or a capital review board can run the scenarios without a license. If your own subscription lapses, it turns into the free demo, so the models you build stay usable either way.

Who makes ReliaSim?

ChiAha, in Maryville, Tennessee: 576 Foothills Plaza #176, Maryville, TN 37801, +1 865-233-8680, reliasim@chiaha.com. ChiAha was founded by Andrew Siprelle, who created discrete rate simulation in 1990. Our team has built simulation software since 1990, and ReliaSim is the third generation of the method, rebuilt from scratch. Our heritage.

What results have customers seen?

Insight Network Logistics, a Union Pacific subsidiary, on a vehicle distribution network model built with our team: “VINLogic, running on live data from VinVision, let our network team see problems weeks before they hit the rail ramps. It was central to the work that saved $21.7M in inventory carrying costs and cut transit time by 19%.” (Mike Keller, Network Design and Simulation Manager, Insight Network Logistics; ChiAha customers). More results, with what was modeled and how, are in the case studies.

A question this page did not answer?

Email reliasim@chiaha.com, call +1 865-233-8680, or book a call.

Open the Sandbox → Schedule a call